6-2 Connector crimping procedure
Dice No. :
Crimping width : 10 mm②Connector:
③Processing procedure<Insert a sleeve>
Put through a sleeve to an
A: 10±0.5 mm
B: 4±0.5 mm
Insert a contact into the internal conductor and crimp.
Put a contact into dice having a diamond shape and closely stick its end surface with the insulator and the dice. Pull the moving frame to the
fixing frame side and crimp until the ratchet is removed.
(Crimping width: 2.2 mm)
Widen a little Crimp Dice blade shape
*Use the crimping tool in the direction shown in the illustration right.
Using the crimping tool in the reverse direction will not crimp correctly.
To the next page