[ ※ 1]
Transfer task number "n" and PC memory data (set the top address
using @S) to a ZW/JW-20CM at port "n."
Contents of @S (Set S to S+6 using the PC)
Top address for
File address (lower bit)
Number of bytes transferred
Receive station's station number
S to S+2: Set the top address for sending data using the file number
and file address.
S+3: Number of data bytes to transfer from the PC to JW-20CM.
Set to 000 to 255(D). (000(D) equals 256 bytes.)
S+4: Station number at which data is received. Set 000 to 077(8) using
S+5, S+6: Reserved area. Set 000(8).
S+7 to S+11(8): Reserved area. Status from a port (not fixed).
Setting range for
Set to TASK 0.
Set a port number for the PC basic rack panel on which the ZW/JW-
20CM is installed.
Port No. ②③④⑤