Sharp JW-20CM, JW-20RS manual 58

Operation procedure

In brackets : See page

Turn “ON” the power of slave station PC

			［8·22］
	Connect support tools
	Stop remote I/O operation		［8·22］
	(parameter address 003777(8) = 00(H)
In case of using ZW-I/O	In case of using ZW-I/O
	Use the slave module having set to		No
	default condition at delivery (initialized
	the parameters), and use it as
	automatic I/O registration function.
		Yes
		A

8

					⑥
					Set of prohibit the auto I/O table		［8·27］
					registration at power “ON”
					(parameter address 001002(8) = 03 (H))
	No						No
			No check the no. of I/O bytes		Not short for I/O	processing time
①		①		Yes		Yes
Set of check no. of I/O bytes		Set of check no. of I/O bytes
(parameter address 003750(8) = 45(H))		(parameter address 003750(8) = 00(H))
②	［8·24］				Not use I/O search		No
Set no. of I/O bytes
						Yes
	［8·24］
					Writing to the EEPROM, start operation
					(parameter address 003777(8) = 81(H))
					End

8·20