Siemens CP 1515 % 5HPRWH5HERRW

5HERRWLQJ5/0V
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01 243
% 5HPRWH5HERRW
To reboot the Radio Link Module from a remote location:
1. Start the RLM Manager program.
2. Select the target Access Point RLM from the list or enter the IP address
for a spe cific R LM.
3. Open the RLM menu.
4. Select 5HERRW RLM.
The RLMMana ger program will now prompt you to enter the password
required to reboot the device.
5. Enter the Read/Write password and click 2..
6. The Radio Link Module will restart and run the start-up diagnostics.
After approximately 15 seconds, the RLM will start bridging operation using
the configuration parameters as they were stored in the RLM prior t o the
reboot.
If you would like to display the configuration file or monitor the Radio Link
Module’s performance after a reboot, you may have to wait until the unit
completes the start-up diagnostics before you can access the Access Point
RLM again.