Model SB1016/SB1036 | P R E P A R A T I O N | For Machines Mfg. Since 7/09 |
Location
Physical Environment
The physical environment where your machine is operated is important for safe operation and longevity of parts. For best results, operate this machine in a dry environment that is free from excessive moisture, hazardous or flammable chemicals, airborne abrasives, or extreme conditions. Extreme conditions for this type
of machinery are generally those where the ambient temperature is outside the range of 41°– 104°F; the relative humidity is outside the range of
Electrical Installation
Place this machine near an existing power source. Make sure all power cords are protected from traffic, material handling, moisture, chemicals, or other hazards. Make sure to leave access to a means of disconnecting the power source or engaging a lockout/tagout device.
Lighting
Lighting around the machine must be adequate enough that operations can be performed safely. Shadows, glare, or strobe effects that may distract or impede the operator must be eliminated.
Weight Load
Refer to the Machine Specifications for the weight of your machine. Make sure that the surface upon which the machine is placed will bear the weight of the machine, additional equipment that may be installed on the machine, and the heaviest workpiece that will be used. Additionally, consider the weight of the operator and any dynamic loading that may occur when operating the machine.
Space Allocation
Consider the largest size of workpiece that will be processed through this machine and provide enough space around the machine for adequate operator material handling or the installation of auxiliary equipment. With permanent installations, leave enough space around
the machine to open or remove doors/covers as required by the maintenance and service described in this manual.
Children or untrained people may be seriously injured by this machine. Only install in an access restricted location.
Wall 
Mi | n. 3 | 0" |
|
| |
147" |
| ||||
|
|
| 18" Electrical |
|
|
|
|
| = Power Connection Location | ||
|
|
| Access Door |
|
|
Keep | 62" |
Workpiece |
|
Loading Area Lathe |
|
Unobstructed |
|
131" |
|
Figure 8. Space required for full range of movement. |
|
