Star Micronics LC24-200 Forward micro-feed, Reverse micro-feed, Changing the auto loading value

3.Press and hold the ( ONLINE ) button.

4.Whileholdingthe ( ONLINE )button down,press the CPiTC17)button, then release both buttons at the same time. The printer will beep to indicatethat the top-of-formpositionhas been set.

Forward micro-feed

For tine alignment,youcan feedthepaperforwardin verysmallincrements as follows:

1.Press the ( ONLINE ) buttonto set the pnntcr off-line.

2.Press the ( ON LINE ) buttonagain and hold it down.

3.Whileholdingthe ( ON LINE ] buttondown,pressthe (PAPERFEED> button.The paper will start advancingin a scnes of small steps. When you want to stop, releaseboth buttons.

Reverse micro-feed

Youcan also feed the paper in small incrementsin reverse,to rctum to a higherpositionon the same page.

NOTE: Withfanfoldforms,do nottry to rctumto a previouspage.Theper- forationmay catch insidethe printerand cause a jam.

1.Press the ( ON LINE ) buttonto set the printeroff-line.

2.Press’the( ON LINE ) buttonagain and hold it down.

3.Whileholdingthe ( ON LINE ) buttondown,press the ( s,~.~~~C.T

1

button.Thepaperwillstartmovingbackwardsin a scncs of smallsteps. When you want to stop, releaseboth buttons.

Changing the auto loading value

Normally,the printer automaticallyloads the paper one line from the top edge.

If you want to changethis value,followthis procedure:

1.Load the paperusing the ( ‘;’$A’vikc’) button.

2.Changethe print positionusing the micro feed function.

The line on lhccard holderhelpsyouto alignthe baselineof characters to be printed.

3.Afteryougctthe desiredposition,pressthe[ ONLINE )button to save the value.

33