Telect MIX 56 user manual 5-11, Tab to the TFTP Load button and press Enter

MIX 56 User Manual 5 Owner Maintenance

MIX 56 by Telect	MIX 56	Directory (Ctrl+D)
		Help (?)
	Update Flash
	------------

TFTP Ethernet Port:

-------------------------------------------------------------------------------

Filename: mix56tst

TFTP Host IP Address: 10. 2. 1. 75 [TFTP Load]

Serial Port: (9-pin)

-------------------------------------------------------------------------------

[Serial Load]

Transfer Program to Standby Card:

-------------------------------------------------------------------------------

[Program Transfer]

2.In the Filename field, type the base name of the update file (without extension) and press Enter.

The system will update from two files, “baseName.EXT” and “baseName.INT.

3.Tab to the TFTP Host Address field, type the address of the TFTP server the file resides on, and then press Enter. The address is divid- ed into four sets of numbers from 0 to 255 each. Type in the four sets of numbers, separated by a period, then press Enter.

4.Tab to the [TFTP Load] button and press Enter.

A prompt appears asking you to confirm updating the software.

NOTE

If you get an error message saying TFTP update requires two cards, it means your system does not have a standby card—you need to use “Serial Load” as described in “Updating Nonredun- dant Systems.”

5.Type y and press Enter. A message appears asking you to wait while the update loads.

The update loads to the standby card. A minor alarm is reported be- cause the active and standby cards now have different software ver- sions.

122188-10 A0 Telect, Inc. 5-11