Telect MIX 56 user manual Name High Speed

4 Software Operation MIX 56 User Manual

Step Action

1.From the Directory screen, press 6 to select High Speed Configura- tion, then Enter.

The High Speed Configuration screen appears.

MIX 56 by Telect	MIX 56	Directory (Ctrl+D)
		Help (?)
	High Speed Configuration
	------------------------
	Name: High Speed
	Clock Source: DS3 Loop Timing
	Mode: M13
	Optional C-bit LAPD Information
Local	-------------------------------
	Remote
Equipment ID: ---------------------------------	-------------------------------
Location ID:
Frame ID:
Unit ID:

Facility ID - Local:

Facility ID - Remote:

[Apply]

2.In the Name field, type a name for the DS3 circuit (up to 16 charac- ters) and press Enter.

3.Tab to the Clock Source field, select a clock source by pressing the spacebar to toggle between DS3 Loop Timing and Internal, and then press Enter.

◊DS3 Loop Timing—Timing is recovered from the incoming DS3 signal.

◊Internal—Timing is generated by the onboard Stratum 4 clock.

NOTE

In DS3 networks, one network element provides master timing, while the other one recovers timing from the incoming DS3 signal.

4.Tab to the Mode field, select a DS3 mode by pressing the spacebar to toggle between M13 and C-bit, and then press Enter.

4-20 Telect, Inc. 122188-10 A0