MIX 56 User Manual | 2 Installation |
Installing M13 Cards
ALERT
ALERT! To avoid electrostatic discharge, always wear a grounding strap plugged into the ESD jack when handling any MIX 56 components.
Step Action
1.Open the card door and loosen the two captive screws (one per side) holding the M13 card door in place. Remove the door:
B
A
2.Align the card with the card guides and gently insert it into the chassis by pressing the ejector handle against the card and pushing the card back.
See the illustration on the next page.
Telect, Inc. |
