Telect MIX 56 Restoring the NVRam from a file results in a reboot of the Mix56 card, 4-31

MIX 56 User Manual 4 Software Operation

click the Open button. On clicking the Open button ProComm will send the file to the Mix56. NOTE, this file must have been previously saved with the save to a file options of screen 3.

WARNING: This sets up your baud rate and network settings which if are changed from your current settings will cause you to lose your connection.

Are you sure you want to restore from a file? y/n n

ProComm is a registered trademark of Symantec Corporation.

b. On pressing y and Enter the prompt appears:

Waiting for data, Send the file.

If you decide not to send the file press the Escape Key.

c.If you’re using ProComm make sure the file transfer proto- col is set to “RAW ASCII” and then open the “Data” win- dow and select the “Send File…” option.

d.Select the file and click the “Open” button. ProComm will open the Sending file window and send the file.

NOTES

-The file must have been previously saved via one of the save file options of the Save Configuration screen.

-Restoring the NVRam from a file results in a reboot of the Mix56 card.

•If you selected option 6, “TFTP, Restore From a File”,

a.A warning prompt appears, read and understand the warn- ing, then press y and Enter.

The warning prompt is —

Restoring Configuration from a file:

This will result in a re-boot of the active card causing a momentary traffic interruption on the DS3 / DS1 lines. The re-boot will also cause this craft session to be terminated.

NOTE: This file must have been previously saved with one of the save to file options of screen 3. Screen 10's "Filename" and "TFTP Host IP Address" fields must be filled out with the filename and the TFTP server's IP address. The file retrieved from the TFTP server has a base filename as specified on screen 10 with a filename extension ".nvr" Screen 9's "IP Address" and "Subnet Mask" fields must be filled out.

WARNING: This sets up your baud rate and network settings which if are changed from your current settings will cause you to lose your connection.

Are you sure you want to restore from a file? y/n n

b.If your network is up and running, i.e. screen 9’s IP address and subnet mask is set. Also if you’ve set the filename and TFTP host IP address on screen 10. Then press y and Enter.

122188-10 A0 Telect, Inc. 4-31