Telect MIX 56 user manual Cross-Connecting Circuits

2 Installation MIX 56 User Manual

Spring Clip

+B –B +A –A – –

RJ-45 Ethernet Cable

Cross-Connecting Circuits

Step Action

1.Connect T and R (OUT) of first jack to T and R (IN) of second jack.

2.Connect T and R (IN) of first jack to T and R (OUT) of second jack.

3.Connect TL to TL (tracer lamps).

4.Record the cross-connect on the supplied designation strip.

Wire-Wrap Cross-Connect Color Scheme

Connect from 1st termination/wire color...	...To 2nd termination/wire color
TL / Green	TL / Green
T (Out) / Blue	T (Out) / Orange
R (Out) / Blue-White	R (Out) / Orange-White
T (In) / Orange	T (In) / Blue
R (In) / Orange-White	R (In) / Blue-White

ALERT

ALERT! DO NOT connect the tracer lamp (TL) signal between systems that operate on different supply voltages, such as be- tween a +24Vdc system and a -48Vdc system. Industry standard tracer lamp circuits are designed to operate with a single system-wide voltage.

2-12 Telect, Inc. 122188-10 A0