MIX 56 User Manual | 1 Descriptions |
MAIN ASSEMBLIES
! ALERT
ALERT! To avoid electrostatic discharge, always wear a grounding strap plugged into the ESD jack when handling any MIX 56 components.
Front Panel
Each MIX 56 chassis houses two independent systems, System 1 and Sys- tem 2. The front of each system is equipped identically (with the exception of one electrostatic discharge (ESD) jack per chassis), and either system can be used as a DSX only, as a nonredundant multiplexer, or as a redun- dant multiplexer.
LED | Craft | ACO/LMP | M13 Cards |
Panel | Port | Button | (two for redundancy) |
ESD Jack | ESD |
|
| CRT MJR | MNR MAINT |
| CRAFT | HS | LS ACO |
|
|
|
| |
| 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19 | 21 | 23 | 25 | 27 |
DSX
Tracer Lamp
DSX Jack 
Pin Field
Fanning Strip | M13 Card Ejector Handle |
|
|
|
|
|
|
| CRAFT |
|
|
|
|
|
|
ESD |
|
| CRT | MJR | MNR MAINT |
|
| HS | LS | ACO |
|
|
|
1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19 | 21 | 23 | 25 | 27 |
TL TL
TROUT RT
TT R IN R
1 | 14 | 15 | 28 |
Front View
(shown without doors)
Front Panel Definitions
ACO/LMP Button: One per system. When pressed and released, it turns off external alarms for a time period specified in the system settings screen of the Craft interface or through SNMP. When pressed and held for three seconds, it tests the LEDs on the LED panel and the M13 cards by chang- ing the panel LEDs to yellow (except Critical and Major, which turn to red) and changing the card LEDs to orange. Testing the LEDs also resets the ACO timer.
DSX Jack: 28 per system. Used for patching and monitoring DS1 signals.
Telect, Inc. |
