![](/images/new-backgrounds/1300558/300558139x1.webp)
4 Software OperationMIX 56 User Manual
This illustration shows mixed T1 and E1 signal types:
MIX 56 by Telect | MIX 56 |
| Directory (CTRL+D) | |
| Low Speed Configuration |
| Help (?) | |
|
|
| ||
Signal Type: Mixed, T1's and E1's |
|
|
| |
Channel Number: 1 | Name: Low Speed 01 |
| [Apply] | |
Type: E1 | InterFace: CI | LBO: Unavailable | ||
State: Enabled | Code: HDB3 |
|
| [Apply All] |
================================================================================
# | Name | Configuration | Alrm | # | Name | Configuration | Alrm | ||||
C HDB3 Una | |||||||||||
15 | Low Speed 15 | T1 | C B8ZS 22d | Ena | |||||||
2 | Low Speed 02 | E1 | C AMI | Una Ena | 16 | Low Speed 16 | T1 | C B8ZS 15d | Ena | ||
3 | Low Speed 03 | E1 | N HDB3 Una Ena | 17 | Low Speed 17 | T1 | C B8ZS | 7d | Ena | ||
4 | Una Ena | 18 | Low Speed 18 | T1 | C B8ZS | 0d | Ena | ||||
5 | Low Speed 05 | E1 | N AMI | 19 | Low Speed 19 | T1 | C B8ZS 110 | Ena | |||
6 | Low Speed 06 | E1 | C HDB3 Una Dis | 20 | Low Speed 20 | T1 | C B8ZS 110 | Ena | |||
7 | Low Speed 07 | E1 | 21 | Low Speed 21 | T1 | C B8ZS 110 | Ena | ||||
8 | 110 | Ena | 22 | Low Speed 22 | T1 | C B8ZS 110 | Ena | ||||
9 | Low Speed 09 | T1 | C B8ZS | 23 | Low Speed 23 | T1 | C B8ZS 110 | Ena | |||
10 | Low Speed 10 | T1 | N AMI | 220 | Ena | 24 | Low Speed 24 | T1 | C B8ZS 110 | Ena | |
11 | Low Speed 11 | T1 | C B8ZS | 330 | Ena | 25 | Low Speed 25 | T1 | C B8ZS 110 | Ena | |
12 | Low Speed 12 | T1 | C B8ZS | 440 | Ena | 26 | Low Speed 26 | T1 | C B8ZS 110 | Ena | |
13 | Low Speed 13 | T1 | C B8ZS | 550 | Ena | 27 | Low Speed 27 | T1 | C B8ZS 110 | Dis | |
14 | Low Speed 14 | T1 | C B8ZS | 660 | Ena | 28 | Low Speed 28 | T1 |
To Configure One or More Channels
Step Action
1.From the Directory screen, type 7 to select Low Speed Configura- tion and press Enter.
The Low Speed Configuration screen appears.
2.In the Channel # field, select a channel by typing the number of the desired channel, and then press Enter.
The remaining input fields display the current configuration infor- mation for the selected channel.
3.Tab to the Name field, type a name for the channel (up to 16 charac- ters), and then press Enter.
4.Tab to the Type field, select a line type by pressing the spacebar to toggle between T1 or E1, and then press Enter. Tab to the Apply button and press Enter.
NOTE
The Type field is only enabled if Signal Type is set for Mixed T1’s and E1’s. This is set in the System Settings screen.
Telect, Inc. |