Telect MIX 56 user manual Tools and Equipment, Computer Floor Issues

MIX 56 User Manual 2 Installation

Two MIX 56s, one on top of the other

MIX 56 or

Other Equipment

One-RU

Heat Baffles

MIX 56 or

Other Equipment

You can set the chassis to project 3, 4, or 5 inches from the front of the rack, depending on which mounting bracket holes you choose. See “At- taching the Mounting Brackets” on page 2-5.

Computer Floor Issues

Each configuration varies in weight depending on the number and type of chassis’ and cables used. If bay weight exceeds the floor support capacity, computer floor supports can be ordered from Telect (part # 071-6000-3001/ 3002 for one or two panels respectively).

Tools and Equipment

ALERT

ALERT! Only use crimping tools (such as Burndy Y8MRB-1 or equivalent) and components approved by agencies or certify- ing bodies recognized in your country or region, such as Un- derwriter's Laboratories (UL), CSA, or CE.

You need the following tools to install MIX 56:

•Flathead screwdrivers: 3/16 to connect low speed cables; 3/32 to wire power connector

•Phillips-head screwdrivers: #1 to remove M13 door, LED panel face- plates, and wire-wrap doors; #2 to attach mounting brackets to chassis and attach chassis to rack

122188-10 A0 Telect, Inc. 2-3