Telect MIX 56 user manual Setting Alarm Thresholds, 4-42, Step Action

4 Software Operation MIX 56 User Manual

Step Action

1.From the Directory screen, press 17 to select Alarm Log, then En- ter.

The Alarm Log screen appears.

MIX 56 by Telect					system 2	Directory (Ctrl+D)
						Help (?)
					Alarm Log - Active
Card Select: Active					------------------
#	Date	Time	Alarm Details
--	---------	--------	----- ---------------------------------------------------
1	22/Oct/03	07:37:35	Mnr	System,multiple low speed failures,on
2	22/Oct/03	07:37:35	Crt	LS-02(Low Speed 02),Rx AIS,off
3	22/Oct/03	07:37:35	Mnr	LS-02(Low Speed 02),LOS,on
4	22/Oct/03	07:37:18	Crt	24	hr. SES HS threshold crossed,off
5	22/Oct/03	07:37:18	Mnr	24	hr. ES HS threshold crossed,off
6	22/Oct/03	07:37:18	Crt	15	min. SES HS threshold crossed,off
7	22/Oct/03	07:37:18	Crt	15	min. ES HS threshold crossed,off
8	22/Oct/03	07:36:52	Crt	System,standby card detected critical alarm,off
9	22/Oct/03	07:36:51	Crt	HS-01(High Speed),LOS,off
10	22/Oct/03	07:30:00	Mnr	24	hr. ES HS threshold crossed,on
11	22/Oct/03 07:29:59 Mnr			24	hr. SES LS threshold crossed,on
					[Next]	[Previous] [Clear]

2.Tab to “Card Select” and press the space bar to toggle between “Active” and “Standby”. Press Enter.

3.To view the next 11 entries, tab to the [Next] button and press Enter.

4.To view the previous 11 entries, tab to the [Previous] button and press Enter.

5.To clear the entire log, tab to the [Clear] button and press Enter. A prompt appears asking you to confirm the clear. Type y and press Enter. The Alarm Log clears.

Setting Alarm Thresholds

In the Alarm Thresholds screen, you can specify some of the conditions that trigger and clear the system alarms. Each threshold is counted in one second increments, and for most alarms, you can set one threshold to trig- ger the alarm and another to clear it (ES and SES alarms do not need Alarm Off thresholds because they clear automatically when the time span on which they are based passes).

4-42 Telect, Inc. 122188-10 A0