MIX 56 User Manual | 3 User Functions |
To Patch with Two Single Patch Cords
Step Action
1.Insert a single patch cord into the IN jack of the first jack.
2.Insert the other end into the OUT jack of the second jack.
3.Insert another single patch cord into the OUT jack of the first jack.
4.Insert the other end of the patch cord into the IN jack of the second jack.
First | Second |
jack | jack |
module | module |
MM
OO
II
TWO SINGLE PATCH CORDS
To Patch with a Dual Patch Cord
Step Action
1.Insert a dual patch cord into the IN and OUT ports of the first jack module.
2.Rotate the plug on the other end of the cord 180 degrees (so that it is turned upside down from the first end) and insert it into the IN and OUT ports of the second jack module.
First | Second |
Jack | Jack |
Module | Module |
M | M |
O | O |
I | I |
| |
| WITH DUAL PATCH CORD |
Monitoring Signals
You can perform nonintrusive signal monitoring by connecting your circuit monitoring device to the front monitor jack (labeled M) of the signal you wish to monitor.
Telect, Inc. |
