Teledyne 300 Software configuration, Summary of setup functions, Press SETUP-DAS, Channels, Step

Step	Action	Comment
1.	Press SETUP-DAS-	Enter DAS menu to edit Data
	EDIT	Channels
2.	Press PREV/NEXT	Select Data Channel to edit
3.	Press EDIT	Edit selected Data Channel
4.	Press SET> (5 times)	Scroll through setup properties until
		RS-232 REPORT: OFF is displayed
5.	Press EDIT	Edit selected setup property
6.	Toggle OFF to ON	Change RS-232 REPORT property
7.	Press ENTR	Accepts change
8.	Press EXIT (4 times)	Exits back to sample menu

See Section 7.3.1 for more information on DAS reporting through the RS-232 interface.

4.12 Software configuration

The software configuration can be displayed by entering the button sequence SETUP-CFG-LIST. For example the M300 could display:

"CO MACHINE"

"SBC40 CPU"

Stating that the instrument was an Carbon Monoxide Analyzer using the SBC40 computer. This feature is useful for showing any special features that are present in the currently installed PROM.

4.13 Summary of setup functions

The setup functions are summarized in Table 4.1 in terms of the button sequences used to access them.

SETUP FUNCTIONS

Button Sequence	Function	Default	Limits
SETUP-CFG-LIST	List Software	CO Mach	N/A
	Configuration
SETUP-ACAL-MODE	Define/Change	Disabled	Zero, Span,
	AutoCal Sequences		Zero-Span
SETUP-DAS-EDIT	Define/Change DAS
	Data Channels
SETUP-DAS-VIEW	View DAS Data	N/A	N/A
SETUP-RNGE-MODE	Set Range Mode	Single	Single,
			Dual, Auto
SETUP-RNGE-SET	Set D/A output range	50 ppm	1-1000ppm

P/N 02163G1 Teledyne API Model 300 CO Analyzer Instruction Manual - Page 50