Toro 5020 service manual Hydraulic Tank SP 2020/3020, 30 to 60 ft-lb 35 to 69 kg-cm

Hydraulic Tank (SP 2020/3020)

26		27
		2
1		22
		5
20
		28	9	10
4
					LATE MODELS
19				37	29
18
		6	33		30
21		15
		7			31
17			14
25
30 to 60 ft–lb	16	13			32
35 to 69 kg–cm		23
8				34	31
					35
11
					36
3
24		23
		12

Figure 86

1.	Oil cap	14.	Hydraulic hose	26.	Tether retainer
2.	Shoulder screw	15.	Lock nut	27.	Oil cap tether
3.	Worm clamp	16.	90o hydraulic fitting	28.	Hydraulic hose
4.	Hydraulic tank	17.	Cap screw	29.	Hydraulic tank
5.	45o hydraulic fitting	18.	Tank base	30.	Return hose
6.	Cap screw	19.	Grommet	31.	Hose clamp
7.	Lock washer	20.	Filter screen	32.	Push on hose fitting
8.	Filter head	21.	Flat washer	33.	Barb fitting
9.	Flat washer	22.	O–ring	34.	Hose clamp
10.	Cap screw	23.	O–ring	35.	Suction hose
11.	90o hydraulic fitting	24.	Hydraulic hose	36.	90o degree hydraulic fitting
12.	Oil fitting	25.	O–ring	37.	O–ring
13.	Hydraulic fitting

NOTE: Tank (29), hoses (30 and 35), hose clamps (31 and 34), fittings (32, 33, and 36), and O–ring (37) re- place tank (4), hoses (28 and 14), fittings (5, 13, and 16), and O–rings (22, 23, and 25).

Hydraulic System (Rev. A) Page 4 – 70 Sand Pro 2020/3020/5020