Toro service manual Traction Reverse, Hydraulic System Rev. A, Page 4, Sand Pro 2020/3020/5020

Traction Reverse

The traction circuit operates essentially the same in re- verse as it does in forward. However, there are a few dif- ferences in operation.

When the traction pedal is pressed to the reverse posi- tion, the linkage from the pedal positions the swash plate in the traction pump so oil flows out of port A. Oil flow out of port A goes to the wheel motors and turns them in the reverse direction. On the SP 5020, the oil flow goes through the left and right rear wheel motors first and then through the front wheel motor. Oil flowing out of the wheel motors returns to port B of the hydrostat and is continuously pumped out of port A.

The right wheel motor does not bleed off any hydraulic fluid for cooling of the closed loop circuit in the reverse direction.

Hydraulic System (Rev. A) Page 4 – 10 Sand Pro 2020/3020/5020