Toro 2020, 5020, 3020 service manual Adjust Traction Pedal for Forward SP

Adjust Traction Pedal for Forward (SP 5020)

If the jam nuts on the control rod are loosened or if the pedal is removed, adjusted traction pedal for forward.

1.Park machine on a level surface and turn engine off.

2.Make sure pump is in neutral.

3.Loosen jam nuts on the control rod.

4.Press down on the forward pad of the pedal until the pedal rod contacts the footrest. Tighten jam nuts.

2

1

Figure 18

1. Jam nuts 2. Control rod

Hydraulic Systems

Sand Pro 2020/3020/5020 Page 4 – 29 Hydraulic System (Rev. A)