Toro 2020, 5020, 3020 service manual Seat SP, Removal

Seat (SP 5020)

		16	3	4
			2
			1
			5
			3
	10		14
	11			6
	8			7
				19
	10			20
RIGHT	9
	3
FRONT	13		18	17
			15
	12		10
			Figure 18

1.	R–clamp	8.	Service decal	15.	Flat washer
2.	Lock washer	9.	Lynch pin	16.	Seat
3.	Cap screw	10.	Lock nut	17.	Lock nut
4.	Manual tube	11.	4–inch seat slider	18.	Flat washer
5.	Seat adjust plate	12.	Leveling screw	19.	Cup holder
6.	Round head screw	13.	Jam nut	20.	Seat base
7.	Flat washer	14.	Seat slider

Removal

1.Park machine on a level surface, engage the park- ing brake, lower attachment, and stop engine.

2.Slide seat all the way forward. Remove both cap screws and lock nuts securing the front of the seat adjust plate to the seat slider.

3. .Slide seat all the way back. Remove both cap screws and lock nuts securing the rear of the seat adjust plate to the seat sliders.

4.Remove seat and seat adjust plate from the seat sliders. Remove four cap screws securing the seat ad- just plate to the seat.

5.Lift seat base. Remove lock nuts and flat washers securing seat sliders to the seat base.

Installation

1.Lift seat base. Secure seat sliders to the seat base with flat washers and lock nuts.

2.Secure seat adjust plate to the seat with four cap screws.

3.Slide seat sliders all the way back. Position seat and seat adjust plate to the seat sliders. Secure rear of the seat adjust plate to the seat sliders with two cap screws and lock nuts.

4.Slide seat all the way forward. Secure front of the seat adjust plate to the seat sliders with two cap screws and lock nuts.

5.Make sure seat slides properly and locks in place.

Whells, Brakes, and Miscellaneous

Sand Pro 2020/3020/5020 Page 6 – 19 Wheels, Brakes,and Miscellaneous