Remote Air Cleaner (SP 5020)
Remote Air Cleaner Removal
1.Park machine on a level surface, lower attachment, stop the engine, engage parking brake, and remove the key from the ignition switch.
2.Loosen hose clamp. Remove air cleaner hose from the air cleaner body.
3.Remove both lock nuts, flat washers, and cap screws securing the mounting band to the right fender.
4.Unlatch and remove cover from air cleaner body. Separate body from the mounting band. Make sure not to drop the filter element.
Remote Air Cleaner Installation
1.Insert air cleaner body through the mounting band. Make sure filter element is inside the body. Install and latch cover to the air cleaner body.
2.Secure mounting band and air cleaner to the front shield with both cap screws, flat washers, and lock nuts.
3.Secure air hose to the air cleaner with hose clamp.
5
4
1
|
|
| 3 |
|
|
| 2 |
| Figure 22 |
| |
1. | Body | 4. | Latch |
2. | Cap screw & flat washer | 5. | Cover |
3. | Mounting band |
|
|
Engine | Page 3 – 14 | Sand Pro 2020/3020/5020 |
