Toro Remote Air Cleaner SP 2020/3020, Remote Air Cleaner Removal, Sand Pro 2020/3020/5020

Remote Air Cleaner (SP 2020/3020)

Remote Air Cleaner Removal

1.Park machine on a level surface, lower attachment, stop the engine, engage parking brake, and remove the key from the ignition switch.

2.Remove three cap screws securing the hood to the front shield (Fig 19). Remove four cap screws securing the dash panel to the hood (Fig. 20).

3.Loosen hose clamp. Remove air hose from the air cleaner body (Fig. 21).

4.Remove both lock nuts, flat washers, and cap screws securing the mounting band to the front shield (Fig. 21).

5.Unlatch and remove cover from filter body. Sepa- rate filter body from the mounting band. Make sure not to drop the filter element (Fig. 21).

1

2

3

Figure 19

1.	Hex flange head screw	3. Front shield
2.	Hood

Remote Air Cleaner Installation

1.Insert filter body through the mounting band. Install and latch cover to the filter body (Fig. 21).

2.Secure mounting band and air cleaner to the front shield with both cap screws, flat washers, and lock nuts (Fig. 21).

3.Secure air hose to the air cleaner with hose clamp (Fig. 21).

4.Position hood to the front shield. Potion dash panel to the hood. Secure dash panel to the hood with four cap screws (Fig. 20). Secure hood to the front shield with three cap screws (Fig 19).

2

2

1.Cap screws

2.Dash panel

2

3

4

1.Hose clamp

2.Air hose

3.Air cleaner body

1

1

Figure 20

3. Hood

15

6

Figure 21

4.Lock nut & flat washer

5.Mounting band

6.Cover

Engine

Sand Pro 2020/3020/5020 Page 3 – 13 Engine