Toro 5020 service manual Service and Repairs, Seat SP 2020/3020

Service and Repairs

Seat (SP 2020/3020)

1

5

3

2

4

2

4

		15	16		12
				6
				13
		14		7
		11
		10		8
		9		6
1.	Seat		Figure 5
		7.	Cap screw	12.	Angle bracket
2.	Cap screw	8.	Seat clamp	13.	Spacer
3.	R–clamp	9.	Service decal	14.	Lock nut
4.	Flat washer	10. Rubber cushion		15.	Seat base shield
5.	Manual tube	11. Seat plate		16.	Cap screw
6.	lock nut

Brakes, Miscellaneous

Removal

1.Park machine on a level surface, engage the park- ing brake, lower attachment, and stop engine.

2.Lift seat up. Remove four cap screws from seat plate and seat. Separate seat from plate. Make sure not to lose four spacers.

3.Remove seat plate from frame by removing lock nuts, cap screws and flat washers from the angle brack- ets and seat clamps.

Installation

1.Install seat plate to frame by securing plate to angle brackets and seat clamps with cap screws, flat washers, and lock nuts. Secure manual tube and R–clamps to angle bracket with cap screws, flat washers, and lock nuts.

2.Position seat and spacers to seat plate. Insert cap screws through plate and spacers. Screw cap screws into seat and tighten.

3.Replace rubber cushions if worn or damaged.

Whells, and

Sand Pro 2020/3020/5020 Page 6 – 5 Wheels, Brakes,and Miscellaneous