Toro 5020, 2020, 3020 service manual Front Wheel SP, Removal Fig

Front Wheel (SP 2020)

	5
	7
	6
	3	1
	12
		2
4	5
		13
		10
	9	2
		11
		1
		5
		6
		7
	RIGHT	5
	8
	FRONT	4
	14	3

Figure 6

1.	Hex nut	6.	Bearing
2.	Lock washer	7.	Locking collar
3.	Carriage bolt	8.	Tire
4.	Set screw	9.	Front axle
5.	Bearing flange	10.	Front fork

Removal (Fig. 6)

1.Park machine on a level surface, engage parking brake, lower attachment, and stop the engine.

WARNING

Before jacking up the machine, review and follow Jacking Instructions in Chapter 1 – Safety.

2.Jack up front fork enough to allow the bearing flanges and front axle to drop free of the fork.

3.Loosen set screws on both locking collars; Unlock collar by turning against the direction of shaft rotation.

4.Remove hex nuts and lock washers from carriage bolts securing the bearing flanges to the front fork.

11.Lug nut

12.Drive stud

13.Wheel rim

14.Valve stem

CAUTION

Support wheel and shaft when removing car- riage bolts from the front fork and bearing flanges to prevent personal injury.

5.Remove carriage bolts from bearing flanges and front fork. Lower front wheel from fork.

6.Slide bearing flanges and bearings off the front axle.

7.Separate bearing flanges from the bearings.

8.Remove lug nuts from the drive studs. Separate front axle from wheel rim.

Wheels, Brakes, and Miscellaneous Page 6 – 6 Sand Pro 2020/3020/5020