Toro 5020, 2020, 3020 Install front wheel to the front fork see Front Wheel Installation, Page 6

4.Position fork shaft up through frame. Install bearing cone and bearing washer onto the shaft. If bearing con- es were damaged, install new bearing cone onto shaft.

5.Screw slotted nut onto the fork shaft until a slight drag is felt while rotating the fork. Back off nut so nearest slot aligns with cross hole in the shaft. Secure nut to shaft with cotter pin.

6.Install front wheel to the front fork (see Front Wheel Installation).

7.Position steering chain around the sprocket and chain guide. Secure chain to chain bracket with steering adjustment pins and lock nuts. Adjust steering chain (see Adjust Steering Chain).

Wheels, Brakes, and Miscellaneous Page 6 – 18 Sand Pro 2020/3020/5020