Toro 5020 service manual Hour Meter, SP 2020/3020

Hour Meter

IMPORTANT: Make sure to observe polarity on the meter label when testing. Damage to the meter may result from an improper connection.

1.Connect the positive (+) terminal of a 12 VDC source to the positive terminal of the hour meter.

2.Connect the negative (–) terminal of the voltage source to the other terminal of the hour meter.

3.The hour meter should move a 1/10 of an hour in six minutes.

4.Disconnect the voltage source from the hour meter.

SP 2020/3020

Figure 6

QUARTZ	RUNNING: INDICATOR
	WINDOW

0 0 0 0 0	10–
	1

HOURS

1/10 WHEEL: WHITE W/BLACK NUMBERS

HOUR WHEELS: BLACK W/WHITE NUMBERS

SP 5020

Figure 7

Electrical Systems

Sand Pro 2020/3020/5020 Page 5 – 11 Electrical Systems