Hood and Dash Panel (SP 2020/3020)
Removal
1.Park machine on a level surface, lower attachment, stop engine, engage parking brake, and remove key from the ignition switch.
2.Disconnect black (negative) cable from the battery.
3.Remove three flange head screws securing the hood to the front shield (Fig. 11).
4.Remove four cap screws securing the dash panel to the hood. Remove hood from the machine (Fig. 12).
5.Remove roll pin from upper steering shaft with drift punch. Remove steering wheel from the shaft (Fig. 23).
6.Remove both flange head screws from the dash panel and steering post (Fig. 12).
7.Disconnect electrical connections from the fuse holder, hourmeter, and ignition switch (Fig. 12).
8.Disconnect choke and throttle control cables from the engine (see Throttle Control and Choke Control Re- moval in Chapter 3 – Briggs & Stratton Vanguard En- gines).
9.Pull dash panel up from the steering post and ma- chine (Fig. 12).
Installation
1.Position dash panel over the steering post and to the machine (Fig. 12).
2.Connect choke and throttle control cables to the en- gine (see Throttle Control and Choke Control Installa- tion in Chapter 3 – Briggs & Stratton Vanguard Engines).
3.Secure dash panel to steering post with both flange head screws (Fig. 12).
4.Connect electrical connections to the fuse holder, hourmeter, and ignition switch (Fig. 12).
5.Position steering wheel to the upper steering shaft. Secure wheel to shaft with roll pin (Fig. 23).
6.Position the hood to the dash panel. Secure hood to panel with four cap screws (Fig. 12).
7.Secure hood to the front shield with three flange head screws (Fig. 11).
8.Connect black (negative) cable to the battery.
12
5
3 |
| 4 | 6 |
|
| ||
|
| Figure 21 |
|
1. | Flange head screw | 4. | Adjustment pin |
2. | Hood | 5. | Lock nut |
3. | Front shield | 6. | Steering chain |
3 | 1 |
| 8 |
2
6
|
|
| 4 |
| 5 |
|
|
|
|
| 7 |
|
|
| 1 |
|
| Figure 22 |
|
1. | Cap screws | 5. | Fuse holder |
2. | Dash panel | 6. | Hourmeter |
3. | Hood | 7. | Ignition switch |
4. | Flange head screw | 8. | Steering post |
2
1
Figure 23
1. Roll pin | 2. Steering wheel |
Whells, Brakes, and Miscellaneous
Sand Pro 2020/3020/5020 | Page 6 – 23 | Wheels, Brakes,and Miscellaneous |
