Starting and Stopping the Generator
Starting and Stopping the Generator
Use the XW Auto Generator Start to start or stop the generator manually using the XW System Control Panel or automatically in response to an electrical system condition.
To set the XW Auto Generator Start to start and stop the generator automatically:
1.On the XW Auto Generator Start menu, highlight GenMode and press Enter.
2.Use the navigation button to select [Automatic].
3.Press Enter.
To start the generator manually:
1.On the XW Auto Generator Start menu, highlight GenMode and press Enter.
2.Use the navigation button to select [ManualOn].
3.Press Enter.
To stop the generator manually:
1.On the XW Auto Generator Start menu, highlight GenMode and press Enter.
2.Use the navigation button to select [ManualOff].
3.Press Enter.
Important: To avoid XW Auto Generator Start faults, try not to combine automatic and external manual starts and stops.
When the generator has been started automatically, allow it to stop automatically unless a situation occurs that requires the generator to be stopped urgently.
Likewise, if the generator has been started manually, ensure that it is stopped manually. Only the “Max Run Time” setting can automatically stop the generator after it has been started manually.
XW System Home Screen | Select Device Menu | Auto Gen Start Menu |
Figure
