
Operation
Using Quiet Time
Use the Quiet Time feature to ensure that the XW Auto Generator Start will not start the generator during the night or during times that conflict with local noise restrictions.
Using Quiet Time involves three steps.
1.“QT En” must be set to [Enabled]. The default setting is [Enabled].
2.“QT Begin” must have an appropriate time set for Quiet Time to start on schedule. The default setting for “QT Begin” is [9:00 PM] or 21:00 if using a
3.“QT End” must have an appropriate time set for Quiet Time to stop on schedule. The default setting for “QT End” is [8:00 AM] or 8:00 on the
For more information about Quiet Time settings, see “QT En” on page 3– 7, “QT Begin” on page
XW System | Select Device Menu | XW Auto Generator | Set Quiet Time | |
Home Screen | Start Menu | Parameters | ||
|
Figure 4-3 Using the Quiet Time Feature
To enable Quiet Time:
1.On the Auto Gen Start menu, use the navigation buttons to highlight “QT En”.
2.Press Enter.
3.Use the navigation buttons to select [Enabled].
4.Press Enter.
To set the beginning of Quiet Time:
1.On the Auto Gen Start menu, use the navigation buttons to highlight “QT Begin”, then press Enter.
2.Use the navigation buttons to select the hour, then press Enter.