Configuration
To change operational settings on the XW AGS
Menu:
1. | Use the Navigation Buttons to select the desired |
|
| operation. |
|
2. | Press Enter to highlight the current value for that |
|
| setting. Asterisks (*) indicate the last value set. |
|
3. | Use the Navigation Buttons to change the value. |
|
| Holding the Navigation Button down without |
|
| releasing it will scroll through the values quickly. |
|
4. | Press ENTER to select the value. |
|
5. | Press Exit twice to return to the XW System | Auto Gen Start Menu |
| Home Screen. | |
|
|
See Figure
To access the advanced settings to configure specific operational parameters:
•Press the Enter button and the Up and Down Arrow Buttons at the same time.
See Figure
Figure 3-3 Changing Settings
The XW Auto Gen Start Menu
The XW Auto Gen Start menu provides the ability to configure the changeable parameters, select the generator’s operating mode, clear fault warnings and view device information.
The XW Auto Gen Start Menu Home Screen is divided into five sections.
•Advanced Settings (Configuration Settings)
•GenMode (Manual on/Manual off/Automatic)
•Mode of Operation (Operating/Standby)
•Clear Fault Warnings
•View Device Info
