![](/images/new-backgrounds/1124361/124361331x1.webp)
10 Paper and other Media
Please refer to Setting the Paper Size in the Paper and other Media chapter on page 163.
Using the Bypass Tray
The bypass tray is located on the front of your machine. It can be closed when not in use, making the product more compact. Use the bypass tray to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper tray. Acceptable print media is plain paper from 3.8" x 5.8" to 8.5" x 14" Legal (98 mm x 148 mm to 216 mm x 356 mm) and weighing between 16 lb and 24 lb (60 g/m² and 90 g/m²).
Loading the Bypass Tray
Remove any curl on postcards and labels before loading them into the Bypass Tray.
1.Lower the bypass tray, located on the front of the product and unfold the paper support extension.
2.Prepare a stack of paper for loading by flexing or fanning them back and forth. Straighten the edges on a level surface.
3.Load the print material with the print side facing down and against the right edge of the tray.
NOTE: Hold transparencies by the edges and avoid touching the print side.
Bypass Tray
160 | Xerox Phaser 3635 User Guide |