5Network Scanning

Scan Procedure

This section describes the basic procedure for scanning. Follow the steps below.

Load the Documents – page 88

Select Network Scanning – page 89

Select Network Scanning Template – page 90

Change Feature Settings – page 90

Start the Network Scanning Job – page 91

Job Status Screen – page 91

Stop the Network Scanning Job – page 92

NOTE: If an authentication feature is enabled, you may need an account before using the machine. To get an account, or for more information, contact the System Administrator.

Load the Documents

You can load the documents to be scanned either on the Document Glass or through the Document Feeder.

Document Feeder:

The following steps explain how to load documents using the document feeder:

1.Before loading the documents into the document feeder, ensure they are in good condition and remove all staples and paper clips.

2.Insert the documents neatly into the document feeder, face up. The first page should be on top with the headings towards the left of the machine.

3.Place the stack in the middle of the guides aligning the left edge with the document feeder tray, and position the guides to just touch the edge of the documents.

88

Xerox Phaser 3635 User Guide

Page 94
Image 94
Xerox 3635 manual Scan Procedure, Load the Documents