
12 Maintenance
Cleaning the Machine
WARNING: When cleaning your machine DO NOT use organic or strong chemical solvents or aerosol cleaners. DO NOT pour fluids directly onto any area. Use supplies and cleaning materials only as directed in this documentation. Keep all cleaning materials out of the reach of children.
WARNING: DO NOT use pressurised
CAUTION: DO NOT remove the covers or guards that are fastened with screws. You cannot maintain or service any of the parts that are behind these covers and guards. DO NOT attempt any maintenance procedure that is NOT specifically described in the documentation supplied with your machine.
Document Glass and Constant Velocity Transport (CVT) Glass
1.Use a soft,
dampened with water. Liquid | Document |
should never be poured directly | glass |
| |
onto the glass. |
|
CVT glass
2.Wipe clean the entire glass
area.
3.Wipe away any residue with a clean cloth or paper towel.
NOTE: Spots or marks on the glass
will be reproduced on the prints when copying from the document glass. Spots on the Constant Velocity Transport Glass will show up as streaks on the prints when copying from the document feeder.
The Control Panel and Touch Screen
Regular cleaning keeps the touch screen and control panel free from dust and dirt. To remove finger prints and smudges, clean the touch screen and control panel as below:
1.Use a soft,
2.Wipe clean the entire area, including the touch screen.
3.Remove any residue with a clean cloth or paper towel.
Xerox Phaser 3635 User Guide | 203 |