Xerox 3635 manual Localization, Set Date and Time, Greenwich Mean Time Offset

Models: 3635

1 228
Download 228 pages 56.88 Kb
Page 177
Image 177

11 Setups

Localization

Before using your new machine, the localization settings below will have been set using the machine installation wizard. As your requirements change, you may need to reset or adjust these settings.

Set Date and Time

Some features and functions on the machine require the local date and time such as the header on a fax and the configuration sheet. This utility enables you to set and change the local date and time on the machine.

Tools > Device Settings > General > Set Date & Time

Set the date in either mm/dd/yy or dd/mm/yy or yy/mm/dd format, and enter the correct date.

Set the correct time using either the 12 or 24 hour clock. Enter the time in the Hour and Minutes fields and choose AM and PM as relevant, if it’s a 12 hour clock.

NOTE: Any changes made to time or date will require the machine to be rebooted before taking effect.

Greenwich Mean Time Offset

Select the required offset using the increase and decrease buttons to the left and select Save when complete. Information for the GMT offset setting can be found in the Quick Use Guide.

Xerox Phaser 3635 User Guide

171

Page 177
Image 177
Xerox 3635 Localization, Set Date and Time, Greenwich Mean Time Offset, Tools Device Settings General Set Date & Time