5Network Scanning

2.Select Network Scanning on the touch screen. Ensure that the Network Scanning screen is displayed.

NOTE: If an authentication feature is enabled, you may need an account before using the machine. To get an account, or for more information, contact the System Administrator.

2 Select Network Scanning Template

Network Scanning uses preset templates created by the System Administrator. These templates already contain feature settings customized to the user. Use the up/down scroll buttons located to the right of the Template List on the Network Scanning tab to move through the list and select a Template.

For more information on Network Scanning templates, refer to Network Scanning on page 94.

3 Change Feature Settings

To temporarily change the template settings, perform the following:

1.Press the Clear All button once on the control panel to cancel any previous selections. The control panel returns to the default Entry screen.

2.Select one of the following tabs for the feature required.

Feature

Description

 

 

 

 

 

Use the features on this tab to select the required template.

Network Scanning

Use this feature also to temporarily change the information

relating to your original, e.g. color scanning, 2 sided

 

 

originals, etc.

 

 

90

Xerox Phaser 3635 User Guide

Page 96
Image 96
Xerox 3635 manual Select Network Scanning Template, Change Feature Settings