10 Paper and other Media
4. Adjust the paper guide to the width of the stack of print material. Ensure you have not loaded too much print media. The stack should be under the Max Fill Line.
Paper Guide
Max Fill Line
5.The UI screen shows the current paper supply settings for the Bypass Tray on the left hand side. Press the Size button and/or the Type or Color button to change the settings if necessary. If the settings are correct, press the Confirm button. Please refer to Setting the Paper Size in the Paper and other Media chapter on page 163.
Envelope Mode
| 1. | Lower the bypass tray, located on the right side of the product and unfold the |
|
| paper support extension. |
Remove any curl on | 2. | Prepare a stack of envelopes for loading by flexing or fanning them back and |
envelopes before loading |
| forth. Straighten the edges on a level surface. |
them into the Bypass Tray.
3.Load envelopes short edge feed and with the flaps facing up.
Bypass Tray
Xerox Phaser 3635 User Guide | 161 |