Setup (Multi Zone)Use this menu to set the functions of the multi-zone configuration.■Zone SP Assign(Zone speaker assignment)Use this feature to assign the speaker terminals for Zone 2 and Zone 3.

Note

If you want use the external amplifiers for the all channels in the main zone, you can use all the speaker terminals of this unit for Zone 2 and/or Zone3 (pre-amplifier mode). Set “PREAMP MODE” in “ADVANCED SETUP” to “ON” (page 131).

1Press 9k / n to select the speaker terminal and then press 9l / h repeatedly to select

the desired zone of which you want to use the speakers.

Zone4 Set

M 2 3

Zone OSD

SP1

 

–

2 3

 

Zone SP Assign

SP2

 

Component Assign

OK

CANCEL

Zone :

 

Party Mode Set

SP Terminal :

M: Main zone2 : Zone 23 : Zone 32Press 9k / n to select “OK” and then press 9ENTER to confirm the setting.

y

•To return to the previous menu level without change, select “CANCEL” in step 2.

■Component Assign(Component assignment)

Use this feature to assign the COMPONENT VIDEO (MONITOR OUT/ZONE OUT) jacks to the main zone or another zone. Video signals are directed to the video monitor in the selected zone if the corresponding input source is selected.

Choice

Functions

 

 

Main

Select this setting when you want to connect the

 

video monitor in the main zone to the

 

COMPONENT VIDEO (MONITOR OUT/

 

ZONE OUT) jacks.

 

 

Zone2

Select this setting when you want to connect the

 

video monitor in the Zone 2 to the

 

COMPONENT VIDEO (MONITOR OUT/

 

ZONE OUT) jacks.

 

 

 

Graphical user interface (GUI) menu

 

 

Zone3

Select this setting when you want to connect the

 

video monitor in the Zone 3 to the

 

COMPONENT VIDEO (MONITOR OUT/

 

ZONE OUT) jacks.

 

 

Zone4

Select this setting when you want to connect the

 

video monitor in the Zone 4 to the

 

COMPONENT VIDEO (MONITOR OUT/

 

ZONE OUT) jacks.

 

 

Notes

•The video conversion function does not work for the COMPONENT VIDEO (MONITOR OUT/ZONE OUT) jacks if “Component Assign” is set to “Zone2”, “Zone3”, or “Zone4”.

•The COMPONENT VIDEO (MONITOR OUT/ZONE OUT) jacks do not output OSD signals.

■Party Mode Set (Party mode settings)

The party mode enables you to play the same source in multiple zones simultaneously (page 129). Use this feature to enable or disable the party mode in each zone.

Target: Zone2/Target: Zone3/Target: Zone4 (Party mode target zone setting)

Choice

Descriptions

 

 

Disable

Select this setting to exclude the selected zone

 

from the party mode coverage. You can select

 

the input source of the selected zone

 

independently even if this unit is in the party

 

mode.

 

 

Enable

Select this setting to include the selected zone to

 

the party mode coverage.

 

 

■Zone2 Set/Zone3 Set (Zone 2/Zone 3 settings)Zone2 Volume/Zone3 Volume (Zone 2/Zone 3 volume)

Use this menu to select whether this unit controls the volume level of the audio signals output at the ZONE OUT (ZONE 2 or ZONE 3) jacks.

Choice

Descriptions

 

 

Fixed

Select this setting when you want to control the

 

volume level of the selected zone on the external

 

amplifier. This unit fixes the ZONE OUT

 

(ZONE 2 or ZONE 3) volume level to a standard

 

line level.

 

 

Variable

Select this setting when you want to control the

 

volume level of the selected zone on this unit.

 

You can adjust the ZONE OUT (ZONE 2 or

 

ZONE 3) volume level simultaneously with

 

JVOLUME +/– on the remote control.

 

 

OPERATION

ADVANCED

 

 

103 En