You can enjoy good quality sound with the initial factory settings. Although you do not have to change the initial factory settings, you can change some of the parameters to better suit the input source or your listening room.
y
To customize the program parameter settings, press
0SUBMENU to turn on the submenu after you select the desired program.
■Basic configuration of sound fieldprogramsEach sound field program has some parameters defining the characteristics of the program. To customize the selected sound field program, adjust “DSP Level” and/or “Dialogue Lift” first, and then try other parameters.
Adjusting the effect sound level of the sound field programs (DSP Level)Sound field programs add effect sounds (DSP effect sounds) to the original source sound to create sound field in the listening room. Use the “DSP Level” parameter to adjust the level of the effect sounds.
The DSP effect | The DSP effect sound |
sound level is low | level is high |
Use this feature to adjust the vertical position of the dialogues in movies. The ideal position of the dialogues is at the center of the video monitor screen.
Graphical user interface (GUI) menu
The ideal dialogue position
If the dialogues are heard at the lower position of the video monitor screen, increase the value of “Dialogue Lift”.
Move up to the ideal dialogue position
Choices: 0, 1, 2, 3, 4, 5“0” (initial setting) is the lowest position, and “5” is the highest position.Notes
•“Dialogue Lift” is available when “Front Presence” is set to “Yes” (page 93) and headphones are not connected.
•You cannot move the dialogue position down from the initial dialogue position.
OPERATION | ADVANCED |
|
|