Optimizing the speaker setting for your listening room
10Move the optimizer microphone to theposition “3”on the microphone base and then press 9ENTER.“Measurement Completed Successful” appears once all items are measured.11Press 9ENTER to exit from the “Result” screen.y
To view the measurement results in detail, press 9h. Press 9k / n repeatedly to toggle between parameters (page 36). Press 9l to return to the “Result” screen.
12Press 9l to select “Yes” to save the measurement results or 9h to select “No”to discard them.13Press IMENU to turn off the GUI menu and disconnect the optimizer microphone.■Error and warning messagesIf an error or warning message appears during the automatic setup procedure, carry out one of the following operations. For details on each message, see “Automatic setup” (page 145).
•To view the details on the error and warning messages, press 9h. Press 9k / n to display the previous/next page (if available). Press 9lto return to the previous menu level.
•To return to the GUI menu, press 9l.•To retry the measurement, press 9k.•To ignore the message and continue the process, press9n.Note
Some operations cannot be performed depending on the type of error (or warning).
Use this feature to optimize the setup of this unit for multiple listening positions. You can also select the parameters to be optimized by the automatic setup.
1Turn on the video monitor and then connect the optimizer microphone to the OPTIMIZER MIC jack on the front panel.
2Place the optimizer microphone at the first listening position.The following illustration shows how to place the optimizer microphone in order to optimize the setup of this unit for seven listening positions for example.
17
26 
3 4 5
Information
Setup Menu | Multi Measure 1 |
StartWiring
Distance