Selecting audio input jacks(AUDIO SELECT)

Use this feature (audio input jack select) to switch the input jack assigned to an input source when more than one jacks are assigned to an input source.

1Rotate the LINPUT selector (or press one of the input selector buttons (3)) to select

the desired input source.

2Press CAUDIO SELECT and then rotate MPROGRAM selector (or set the operation mode to FAMP and then press OAUDIO SEL repeatedly) to select the desired audio

input jack select setting.

Available input sources

 

 

 

 

 

 

 

 

 

 

 

 

 

USB DOCK V-AUX

VCR DVR CBL/SAT DVD BD/HD DVD

MD/CD-R TV CD PHONO MULTI CH TUNER XM SIRIUS

 

 

 

 

NET

 

A . S E L :

A U T O

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selected audio input jack

 

 

 

 

 

select setting

 

 

 

 

 

 

 

 

 

AUTO

 

Automatically selects input signals in the

 

 

 

 

following order:

 

 

 

 

 

 

 

 

(1) HDMI

 

 

 

 

 

 

 

 

(2)

Digital signals

 

 

 

 

 

 

 

 

(3)

Analog signals

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI

 

Selects only HDMI signals. When HDMI

 

 

 

 

signals are not input, no sound is output.

 

 

 

 

 

 

 

 

 

 

COAX/OPT

 

Automatically selects input signals in the

 

 

 

 

following order:

 

 

 

 

 

 

 

 

(1)

Digital signals input at the COAXIAL jack.

 

 

 

 

(2)

Digital signals input at the OPTICAL jack.

 

 

 

 

When no signals are input, no sound is output.

 

 

 

 

 

 

 

 

 

 

ANALOG

 

Selects only analog signals. If no analog

 

 

 

 

signals are input, no sound is output.

 

 

 

 

 

 

 

 

 

 

 

y

You can configure the default audio input jack select setting with “Audio Select” (page 90).

Note

This feature is not available if no digital input jack is assigned to the selected input source in “I/O Assignment” (page 105). “HDMI” is available only when an HDMI input jack is assigned.

Playback

Selecting the multi-channel input component

Use this feature to select the component connected to the MULTI CH INPUT jacks (page 27) as the input source.

Rotate the LINPUT selector on the front panel to select “MULTI CH” (or press 3MULTI).

y

You can configure the multi channel input settings with “MULTI CH” (page 90).

Note

Sound field programs cannot be selected when “MULTI CH” is selected as the input source.

Selecting the HDMI OUT jackUse this feature to select the HDMI OUT jack(s) to output the input signals.

Set the operation mode selector to FAMP and then press RHDMI OUT on the remote control repeatedly to select the desired setting.

The HDMI output setting changes as follows.

 

OUT1+2

OUT1

 

 

OFF

OUT2

 

 

 

OUT 1+2

 

Outputs the signals at both the HDMI OUT 1

 

 

and HDMI OUT 2 jacks simultaneously.

 

 

 

OUT 1

 

Outputs the signals at the HDMI OUT 1 jack.

 

 

 

OUT 2

 

Outputs the signals at the HDMI OUT 2 jack.

 

 

 

OFF

 

Does not output any signals at the HDMI OUT

 

 

1 and HDMI OUT 2 jacks. Select this setting

 

 

when you do not use the video monitor

 

 

connected to one of the HDMI OUT jacks.

 

 

 

 

y

You can select the HDMI OUT jack at which HDMI control signals are output with “Control Monitor” (page 102).

OPERATION

BASIC

 

 

43 En