Troubleshooting

■Remote control

Problem

Cause

Remedy

See

page

 

 

 

The remote control

Wrong distance or angle.

The remote control will function within a maximum

33

does not work or

 

range of 6 m (20 ft) and no more than 30 degrees off-

 

function properly.

 

axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an

Reposition this unit.

—

 

inverter type of fluorescent lamp, etc.) is

 

 

 

striking the remote control sensor of this

 

 

 

unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

9

 

 

 

 

 

The batteries do not last long and get

Using alkaline batteries is strongly recommended.

—

 

quickly exhausted.

 

 

 

Set the backlight mode to “OFF”.

116

 

 

 

 

 

 

 

The operation mode selector is set

Set the operation mode selector correctly. When

—

 

incorrectly.

operating this unit, set it to the FAMP position.

 

 

 

When operating the component selected by the input

 

 

 

selector button, set it to the FSOURCE position.

 

 

 

When operating the TV set in the 3TV area, set it to

 

 

 

the FTV position.

 

 

 

 

 

 

The control zone setting is incorrect.

Select the zone you want to control.

127

 

 

 

 

 

The remote control code is not correctly

Set the remote control code correctly using

116

 

set.

“List of remote control codes” in “Appendix”

 

 

 

(separate booklet).

 

 

 

 

 

 

 

Try setting another code of the same manufacturer

116

 

 

using “List of remote control codes” in “Appendix”

 

 

 

(separate booklet).

 

 

 

 

 

 

The remote control ID of the remote

Match the remote control ID of this unit and the

123, 130

 

control and this unit do not match.

remote control.

 

 

 

 

 

 

Even if the remote control code is

Program the necessary functions independently into

118

 

correctly set, there are some models that

the programmable buttons using the Learn feature.

 

 

do not respond to the remote control.

 

 

 

 

 

 

The remote control

The batteries of this remote control and/or

Replace the batteries.

9

does not learn new

the other remote control are too weak.

 

 

functions.

 

 

 

The distance between the two remote

Place the remote controls at the proper distance.

118

 

 

controls is too much or too little.

 

 

 

 

 

 

 

The signal coding or modulation of the

Learning is not possible.

—

 

other remote control is not compatible

 

 

 

with this remote control.

 

 

 

 

 

 

 

Memory capacity is full.

Delete other unnecessary functions to make room for

122

 

 

the new functions.

 

 

 

 

 

INFORMATION

ADDITIONAL

 

 

141 En