Each speaker settings

Select whether this unit mutes each speaker channel when you set “Mode” to “Enable”.

Channel Mute

Speaker channel

 

 

Front L

Front left

 

 

Front R

Front right

 

 

Center

Center

 

 

Surround L

Surround left

 

 

Surround R

Surround right

 

 

Surround Back L

Surround back left

 

 

Surround Back R

Surround back right

 

 

Front Presence L

Front presence left speaker

 

 

Front Presence R

Front presence right speaker

 

 

Subwoofer

Subwoofer

 

 

 

 

Choice

Functions

 

 

Mute On

Mutes the selected speaker channel.

 

 

Mute Off

Does not mute the selected speaker channel.

 

 

Setup (Video)Use this menu to adjust the video parameters. y

You can reset the all parameters in “Video” to the initial factory settings by using “VIDEO” of “INITIALIZE” in “ADVANCED SETUP” (page 131).

■ Analog ` Analog

(Analog-to-analog video conversion) Use this feature to enable or disable the video conversion among the analog video jacks (VIDEO, S VIDEO, and COMPONENT VIDEO jacks).

Choice

Functions

 

 

Through

Disables the video conversion among the analog

 

video jacks.

 

 

Conversion

Enables the video conversion among the analog

 

video jacks.

 

 

Graphical user interface (GUI) menu

Notes

•Analog-to-HDMI video conversion is always possible unless video signals are being input at the HDMI input jacks or 1080p- resolution analog video signals are being input.

•This unit does not convert 480 line video signals and 576 line video signals interchangeably.

•480p-, 576p-, 1080i- and 720p-resolution video signals cannot be output at the S VIDEO and VIDEO MONITOR OUT jacks.

•The converted video signals are only output at the MONITOR OUT jacks. When recording a video source, you must make the same type of video connections between each component.

•When composite video or S-video signals from a VCR are converted into component video signals, the picture quality may suffer depending on your VCR.

•Unconventional signals input at the composite video or S-video

jacks cannot be converted or may be output abnormally. In such cases, set “Analog ` Analog” to “Through”.

■Analog ` HDMI (Analog-to-HDMI videosignal processing)

Use this feature to select whether this unit processes the analog-to-HDMI video signals (input at VIDEO,

S VIDEO, or COMPONENT VIDEO input jacks and output at HDMI OUT jacks).

ChoiceFunctions

Through Select this setting when you do not want this unit to process the analog-to-HDMI video signals.

Processing Select this setting when you want this unit to apply the video processing configured in “Processing” to the analog-to-HDMI video signals.

■HDMI ` HDMI(HDMI-to-HDMI video signal processing)

Use this feature to select whether this unit processes the HDMI-to-HDMI video signals (input at HDMI input jacks and output at HDMI OUT jacks).

ChoiceFunctions

Through Select this setting when you do not want this unit to process the HDMI-to-HDMI video signals.

Processing Select this setting when you want this unit to apply the video processing configured in “Processing” to the HDMI-to-HDMI video signals.

■Processing(HDMI video signal processing)

Use this feature to configure the resolution, aspect, and progressive re-processing settings for the video signals output at the HDMI OUT jacks.

Note

This feature is available only when “Analog ` HDMI” or “HDMI ` HDMI” is set to “Processing”.

OPERATION

ADVANCED

 

 

99 En