Using USB and network features
2Press 0MEMORY.The PRESET indicator lights up in the front panel and this unit automatically selects an empty preset number.
Lights up
PRESET | M e m o r y 1 | MEMORY |
|
|
U S B
y
•To store the selected content under an empty preset number automatically, press and hold 0MEMORY for more than 2
seconds instead of step 2. In this case, the following steps are unnecessary.
•To cancel the preset, press 0MEMORY again.
•When you do not complete each of the following steps within 30 seconds, the memory preset mode is automatically canceled. In this case, start over from step 2.
3Press a numeric buttonPreset number
PRESET | M e m o r y 7 | MEMORY |
|
|
U S B
y
If you select a preset number being used (“*” appears next to the preset number), the current preset number will be overwritten.
4Press DENTER (or 9ENTER).
The preset content is set and the PRESET indicator disappears.Press one of the numeric button
This unit starts the playback of the source assigned to the selected numeric button.
Notes
•“Empty Memory!” appears in the front panel display and
the short message display when you press the numeric button
•This unit does not recall the correct item assigned to the selected numeric button
–the connected USB device is incorrect.
–the PC or
–the selected Internet Radio station or Rhapsody® service is temporary unavailable or out of service.
–the directory of the selected item has been changed.
y
This unit stores the relative position of the preset items in a directory or playlist, and does not recall the correct item by using numeric buttons
We recommend the following methods:
USB storage devices
Create eight directories which contain the desired items in a directory beside the directory which contains all music files, and then preset the top item of each directory to the numeric buttons
PC
Create eight playlists which contain the desired items, and then preset the top item of each playlist to the numeric buttons