Connections

(U.S.A. model)Connecting the power cable■ Connecting the AC power cable

Plug the supplied AC power cable into the AC inlet after all other connections are complete, then plug the AC power cable into an AC wall outlet.

AC IN

Connecting the wire of the AM loop antenna

To the AC wall outlet

Press and hold

Insert

Release

AC OUTLETS

SWITCHED

y

 

The wire of the AM loop antenna does not have any polarity

 

and you can connect either end of the wire to AM or GND

 

terminal.

■ AC OUTLET(S) (SWITCHED)

 

U.S.A. and Australia models................................. 1 outlet

Canada model .......................................................

2 outlets

Use these outlet(s) to supply power to any connected components. Connect the power cable of your other components to these outlet(s). Power to these outlet(s) is supplied when this unit is turned on. However, power to these outlet(s) is cut off when this unit is turned off. For information on the maximum power or the total power consumption of the components that can be connected to these outlet(s), see “Specifications” (page 154).

Note

The rated power of the component (such as a subwoofer) connected to these outlet(s) cannot exceed the maximum power supplied by this unit.

30 En