
Saving and recalling the system settings (System Memory)
Use this feature to save and recall up to six of your favorite setting for the main zone. You can also save up to four of your favorite settings for Zone 2, Zone 3 or Zone 4.
Saving the system settings■Saving by the 7SYSTEM MEMORYbuttonsYou can save the system settings stored in “Memory1” to “Memory4” by pressing the corresponding 7SYSTEM MEMORY buttons.
Press and hold one of the 7SYSTEM MEMORY buttons on the remote control for 4 seconds.
“Memory1 SAVE” (example) appears in the front panel display, and then this unit saves the current system setting to the corresponding memory number.
SYSTEM MEMORY
1 2 3 4
y
•If system settings are already stored in the selected memory number, this unit overwrites the old settings.
•To save the system settings for Zone 2, Zone 3 or Zone 4, press HZONE on the remote control repeatedly to select the desired zone and then press and hold one of the 7SYSTEM MEMORY buttons for 4 seconds. To save the system settings for the selected zone, the zone should be turned on.
•This unit saves the parameters in the groups you select by using
the GUI menu when you save the parameters by using the
7SYSTEM MEMORY buttons.
■Saving by the GUI menu operationYou can save the current system settings stored in “Memory1” to “Memory6” by using the “System Memory” menu in the GUI menu.
1Set the operation mode selector on the remote control to FAMP and then pressIMENU.y
If the menu directory other than “Top Menu” (page 84) is displayed, press and hold IMENU to display the top GUI
menu.
2Press 9k / n repeatedly to select “Setup” and then press 9h.
3Press 9k / n repeatedly to select “System Memory” and then press 9h.6Press 9k / n repeatedly to select the desired memory number and then press 9ENTER.
The list of the parameter groups to be saved appears. Available parameter groups vary depending on the selected zone.
Main Save
Input/HDMI Out
Audio
Volume
SAVE
SP Config
CANCEL
Video/Display Set
Others
y
•If system settings are already stored in the selected memory number, this unit overwrites the old settings.
•To load the system settings with the 7SYSTEM MEMORY button operation, use one of “Memory1” to “Memory4”.
7Press 9k / n repeatedly to select the parameter group and then press 9ENTERto check or uncheck the box.Check the boxes for the parameter groups to be saved. For details on parameters to be saved, see “Parameters to be saved” (page 109).
8Press 9k / n / l / h repeatedly to select “SAVE” and then press 9ENTER to savethe current system settings to the selected memory number.y
To cancel the operation, select “CANCEL” and then press
9ENTER.
9Press IMENU to turn off the GUI menu.■Renaming the stored settings1Follow steps 1 to 4 in “Saving by the GUI menu operation” (page 108).2Press 9k / n repeatedly to select “xxx Rename” and then press 9h.“xxx” indicates the zone you selected in step 1.