Graphical user interface (GUI) menu

1Press 9ENTER to start pairing.The connected Bluetooth receiver starts searching Bluetooth components.2Check that the Bluetooth component detects the Bluetooth receiver.For details, refer to the instruction manual of the Bluetooth component.

3Select the Bluetooth receiver in the Bluetooth device list and then enter the pass key “0000” on the Bluetooth component.

Once this unit completes the pairing successfully, “Completed” appears.4Press 9l to return to the previous menu level.

Note

If the connected Bluetooth receiver cannot find any Bluetooth components, “Not found” appears.

■Connect (Bluetooth connection)

Use this feature to establish a connection between the Yamaha Bluetooth receiver (such as YBA-10, sold separately) and your Bluetooth component.

Note

Pairing must be performed when using a Bluetooth component with the Bluetooth receiver connected to this unit for the first time of if the pairing data has been deleted.

Press 9ENTER to establish a connection.

The connected Bluetooth receiver starts searching Bluetooth components. Once the connection is established successfully, “BT Connected” appears.

Note

If the connected Bluetooth receiver cannot find any Bluetooth components, “Not found” appears.

y

To terminate the connection, press 9ENTER again.

■USB Select (USB port select)

Selects the component connected to the front or rear USB port as the input source (page 28).

Choice

Functions

 

 

Front

Selects the component connected to the front

 

USB port as the input source.

 

 

Rear

Selects the component connected to the rear

 

USB port as the input source.

 

 

Music Content

Use this feature to browse the music contents of iPod, USB component, PC/MusicCAST, Internet radio and Rhapsody® (U.S.A. model only). See the following pages for details.

•iPod (page 73)

•USB (page 75)

•PC/MCX (page 75)

•NET RADIO (page 75)

•Rhapsody (page 75)

92 En