Remote control features
Setting the backlight mode of the remote control1Press GSETUP on the remote control usinga ballpoint pen or similar object.“SETUP” appears in the display window (4) on the remote control.2Press 9k / n repeatedly to select “LIGHT” and then press 9ENTER.“LIGHT” and the current “LIGHT” setting appears in the display window (4) alternately.
LIGHT
3Press 9k / n to select the desired setting and then press 9ENTER.Choice | Descriptions |
|
|
ON | Lights up the backlight when a button is |
| pressed. |
|
|
OFF | Lights up the backlight only when |
| 6LIGHT is pressed. |
|
|
You can control other components by setting the appropriate remote control codes. Codes can be set up for each input area. For a complete list of available remote control codes, refer to “List of remote control codes” in “Appendix” (separate booklet).
The following table shows the default component (Library: component category) and the remote control code for each control area.
Remote control code default settingsControl | Library |
| Default | |
(component | Manufacturer | |||
area | code | |||
category) |
| |||
|
|
| ||
|
|
|
| |
MULTI | DVD | Yamaha | 04306 | |
|
|
|
| |
— | — | — | ||
|
|
|
| |
PHONO | — | — | — | |
|
|
|
| |
DOCK | SOURCE | Yamaha | 00012 | |
|
|
|
| |
BD | BD | Yamaha | 04706 | |
HD DVD | ||||
|
|
| ||
|
|
|
| |
DVD | DVD | Yamaha | 04306 | |
|
|
|
| |
CD | CD | Yamaha | 01205 | |
|
|
|
| |
MD | Yamaha | 01405 | ||
|
|
| ||
|
|
|
| |
CBL | — | — | — | |
SAT | ||||
|
|
| ||
|
|
|
| |
TV | — | — | — | |
|
|
|
| |
DVR | DVR | Yamaha | 00707 | |
|
|
|
| |
VCR | — | — | — | |
|
|
|
| |
TUNER | SOURCE | Yamaha | 00012 | |
|
|
|
| |
XM | SOURCE | Yamaha | 00012 | |
|
|
|
| |
SIRIUS | SOURCE | Yamaha | 00012 | |
|
|
|
| |
USB | SOURCE | Yamaha | 00012 | |
NET | ||||
|
|
| ||
|
|
|
|
Note
You may not be able to operate your Yamaha component even if a Yamaha remote control code is preset as listed above.
In this case, try setting another Yamaha remote control code.
1Check the remote control code for your component in advance.For a complete list of available remote control codes, see “List of remote control codes” in “Appendix” (separate booklet).
2Set the operation mode selector on the remote control to FSOURCE.If you want to set the remote control code for “TV”, set the operation mode selector to FTV.