lADAPTIVE DRC indicator

Lights up when the adaptive dynamic range control feature is turned on (page 95).

mDecoder indicators

The respective indicator lights up when any of the decoders of this unit function.

nTuner indicators

Light up when this unit is in the FM, AM, XM Satellite Radio, or SIRIUS Satellite Radio tuning mode.

Note

The HD and TAG indicators are only applicable to the U.S.A. model and used when this unit is tuned into the HD Radio reception band.

oMenu browsing indicator

Lights up if any items exist under the current item during menu browsing for iPod, etc.

pSLEEP indicatorLights up while the sleep timer is on (page 45).qPRE AMP indicatorLights up when this unit is in the pre-amplifier mode (page 131).rVOLUME level indicatorIndicates the current volume level.Flashes while the mute function is on (page 44).sInput channel and speaker indicators

Presence speaker indicators

L C R
SL LFE SR

Input channel indicators

SBL SB SBRInput channel indicatorsIndicate the channel components of the current digital input signal.

Light up or flash according to the settings of the speakers when this unit is in the automatic setup procedure (page 35).

Presence speaker indicators

Light up according to setting for “Front Presence” (page 93) in “Configuration” when this unit is in the auto setup procedure (page 35) or the speaker level setting procedure in the “Level” (page 94).

tZONE2/ZONE3/ZONE4 indicatorsLights up when Zone 2, Zone 3, or Zone 4 is turned on (page 127).

Connections

Using the remote control

The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.

Remote control sensor

Approximately 6 m (20 ft) 30

30

6LIGHTLights up the remote control buttons and the display window (4).Display window (4)[1] [2]

ZONE 4

[3][4][1]ID1/ID2 indicatorIndicates the currently selected remote control ID (page 130).[2] Transmit indicatorAppears while the remote control is sending infrared signals.[3] Zone indicatorsIndicates the currently controlling zone (page 127).[4] Information displayShows the name of the selected input source that you can control.Infrared window (1)

Outputs infrared control signals. Aim this window at the component you want to operate.

PREPARATION

33 En