Yamaha RX-Z7 104 En, Press, +16.5 dB, Control step: 5.0 dB, Control step: 0.5 dB, confirm the selection, Initial setting: 0.0 dB, ■Zone Rename (Zone Rename)

Graphical user interface (GUI) menu

Note

When “Zone2 Volume” or “Zone3 Volume” is set to “Fixed”, you cannot select the following parameters:

–Zone2 Max Vol./Zone3 Max Vol.

–Zone2 Initial Vol./Zone3 Initial Vol.

Zone2 Max Vol./Zone3 Max Vol.(Zone 2/Zone 3 Maximum volume setting)Use this feature to set the maximum volume level in the Zone 2 or Zone 3.Control range: –30.0 dB to +15 .0 dB,+16.5 dBControl step: 5.0 dB

Note

The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.” setting.

Zone2 Initial Vol./Zone3 Initial Vol. (Zone 2/Zone 3 initial volume setting)

Use this feature to set the volume level of Zone 2 or Zone 3 when the power of each zone is turned on.

Control range: Off, Mute, –80.0 dB to +16.5 dB

Control step: 0.5 dB

Note

The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.” setting.

Zone2 Balance/Zone3 Balance (Zone 2/Zone 3 balance)

Use this feature to adjust the balance of the volume of the left and right channels in each zone.

Choices: L10 to L1, 0, R1 to R10Zone2 Tone Control/Zone3 Tone Control (Zone 2/Zone 3 tone control)

Use this feature to adjust the balance of bass and treble output to the selected zone.

Choices: Bass (Bass control), Treble (Treble control)

Control range: –10.0 dB to +10.0 dB

Initial setting: 0.0 dB

Zone2 Mono/Zone3 Mono (Zone 2/Zone 3 monaural mode)

Use this feature to select whether you play back sources monaurally in the selected zone.

Choice	Descriptions

Off	Turns off the monaural playback mode. This
	unit plays back sources in stereo.

On	Turns on the monaural playback mode. This unit
	mixes down the left and right channel signals
	and plays the sources monaurally.

Zone2 Muting Type/Zone3 Muting Type (Zone 2/Zone 3 muting type)

Use this feature to adjust how much the mute function reduces the output volume of the selected zone.

Choice	Functions

Full	Mutes all the audio output.

–20dB	Reduces the current volume by 20 dB.

–40dB	Reduces the current volume by 40 dB.

■Zone OSD (Zone on-screen display)

Use this feature to display the operational status of Zone 2, Zone 3, and Zone 4 on the Zone 2 video monitor connected to the ZONE VIDEO jacks on the rear panel of this unit.

Choice	Functions

Off	Turns off the zone on-screen display feature.

Zone2	Displays the operational status of Zone 2 only.

All	Displays the operational status of Zone 2, Zone
	3 and Zone 4.

■Zone Rename (Zone Rename)Main/Zone2/Zone3/Zone4 (Main/Zone 2/Zone 3/Zone 4 rename)Use this feature to edit the name of the selected zone.

1Press 9k / n / l / h to select a character or function and then press 9ENTER to

confirm the selection.

Repeat step 1 until you input a name you want to use.2Press 9k / n / l / h to select “SAVE” and then press 9ENTER.

•To reset the name, select “RESET” and then press

9ENTER.

•To cancel the operation without change, select “CANCEL” and then press 9ENTER.